Scale Sizes 12″, 20″, 24″,30″,36″
Indoor or outdoor service
Standard, over-pressure safety traps provide absolute protection against loss of fluid
Heavy, heat treated aluminium construction
The Groth 8170 Well-Type Manometer is a direct reading, single column type pressure gauge providing accurate pressure readings, positive, negative, or differential. It is used to indicate gas pressure in lines from the digester and those leading to utilities and waste gas burners. The Groth unit may be used indoors or outdoors and is designed to be mounted almost anywhere for convenience. The Groth Model 8170 may be wall mounted or panel mounted. Any number of tubes may be mounted side by side on a common panel. A solid acrylic assembly protects the shatter-proof tube and the scale against dust, dirt, and rain. Groth manometers have no hidden wells or packing glands, and so are leak proof. The tube can be filled with a red oil-type liquid. The large-type inch scale is easy to read. Heavy aluminum construction and durable coating provides a long lasting product which is designed for easy cleaning and maintenance.
Groth manometer panels are constructed of 14 gauge carbon steel with a corrosion resistant epoxy finish.
Multiple manometers are factory installed and interconnected to simplify installation. Each pressure port is connected to a vented stainless steel valve for isolation and zero calibration. All manometers are connected to a common panel vent port, and a flame check is provided for the vent line. Wall mounting is easy and connections are made at the bottom of the panel.
Related pressure and vacuum safety-relief products
- Assentech have extensive experience in the supply, installation and servicing of tank equipment from all manufacturers, as well as a full understanding of the theory, standards and legislation that applies.
- Assentech supply all Groth's Product Range ( We are the UK'S Exclusive Supplier for Groth Corporation).
Some of our customers testimonials
After conducting a Third Party Witness Inspection, I was most impressed with Ewart and his team, their professionalism, and product knowledge I found to be excellent.
Assentech- Geodesic Dome Installation
Assentech were subcontracted to assemble and install a 25m geodesic dome for Shaft G on the Lee Tunnel project. My experience with Assentech from pre-contract through to assembly has been very positive. Unlike other subcontractors I have experienced on this project, Assentech had a very positive attitude to producing the level of documentation required for a project of this scale. Leading to a high quality pre construction packaged approved in a timely manner. The communication regarding the manufacturing process was first class allowing us to easily plan our works and prepare the site. Dome assembly was carried out very efficiently and completed to programme. The task was correctly resourced and well supervised. The work force had a positive attitude and carried out the task safely. In summary from my perspective it has been a very easy subcontract to manage with a high quality finished product.
We were extremely pleased with the level of service and professionalism demonstrated by Assentech, right from our initial enquiry, through delivery and post installation. As a recipient of only two of these awards made by Eastman Chemical Company in the UK, based on performance in 2014, Assentech are rightly proud of their achievements.
As you said “you delivered what it said on the tin”. On time and on budget. Your up front engineering to determine the suitability of your product for our application was second to none, i have not seen anyone else in the industry pay as much attention to detail before you get the purchase order number as Assentech.
Assentech have supported our Navigator Terminal (formerly known as Vopak Teesside) on two important projects by providing technical assistance and supplying and fitting a total of 11 Internal floating roofs. Both projects have been completed on schedule and on budget. Assentech have provided an excellent level of experience and front end engineering support with high quality drawings and documentation. Their specialist on site labour have worked collaboratively with us and Assentech have proven to be open, honest and flexible partners.
We have experience of both their Heavy Duty Pontoon type and Full Contact IFR’s and we continually monitor operation and performance of all lFR units Installed on site and consider the Assentech supplied Matrix brandto be the best in the market with exceptional build quality and rigidity. Our clients have inspected the installations and have always remarked upon the build quality and have been impressed with their strength in fully supporting up to four people without noticeable deformation. The design and construction of their stainless steel shoe seals continue to prove to operate excellently with no noticeable reduction in performance or flotation ability over the time since Installation.
Assentsch have proven to be extremely competitive on price and their installation and inspection activities have always been thorough. Navigator therefore have no hesitation in recommending Assentech to other companies considering their services.